Propride Hitch Problems: 3 Key Issues & Fixes

Your trailer must be towed by one type of equipment. It is called a hitch and comes in varieties of sizes and shapes. Hitches manufactured by ProPride are of the highest quality.

If a hitch is damaged or defective, then it can be very problematic. When your ProPride hitch isn’t connected to your vehicle, your trailer is essentially useless. With ProPride hitches, you’ll probably encounter 3 Propride Hitch Problems — excessive swaying, inefficient weight distribution, & physical damage as well. You can solve each problem individually, but prevention is always better than constantly solving problems that have already happened.

By following this guide, I’ll clarify some common issues I’ve experienced with ProPride hitches. Then, I’ll describe how to deal with each issue as it arises, as well as some tips I’ve used to avoid them in the future. Hence, let’s go over the details of mounting a ProPride hitch.


What are Common Propride Trailer Hitch Problems?

Following the introduction to ProPride hitches, let’s explore some possible problems and fixes. According to my earlier remarks, you will encounter three key problems. Let’s look in more detail below.

Read Also: Electric or Hydraulic RV Leveling System: What Is Better?

Problem 01: Uncontrolled Swaying

There’s one major problem you’ll face is uncontrollable swaying. In most cases, ProPride hitches deliver what they promise in terms of stabilizing connections. However, as time passes, wear and tear on the parts of the hitch causes it to sway uncontrollably. 

Most often, though, incorrect installation, loose bolts, and improper tension cause this problem. When having problems with the ProPride hitch, make sure the bolts are tightly secured. In case they’re not, screw them down until they’re firmly fastened, but don’t over tighten them, otherwise, you’ll strip the threads. A correctly installed hitch is essential. 

There is no point in tightening the bolts or applying tension if they aren’t tight enough.

After that, make sure the hitch is tensioned. With a loose hitch, trailers are prone to moving around widely, which can cause them to sway. When the tension becomes too tight, the trailer won’t sway as much, instead, it will ride more roughly. To find the right balance, you will have to experiment.

Fixing the Problem:

When installing a hitch, make sure you follow the manufacturer’s instructions. The trailer & truck are connected precisely as you know how. As an alternative, contact a professional or individual who has experience hooking up hitches. You will be notified if your PSI rating is below the required level. If your tires are in good condition, you can get them filled without delay.

Read Also: Common Recurve R6 Hitch Problems – Symptoms & Solutions

Problem 02: Proper Weight Distribution

Weight distribution is also an issue you will have to consider when setting up the hitch. The problem primarily arises during the setting up process. Nevertheless, when the trailer’s weight is excessively heavy or unevenly distributed, your trailer can drag or sway and cause the hitch to fail.

Then, when you experience problems with the ProPride hitch, make sure your trailer is properly weighed. Depending on the model, some ProPride hitches are capable of towing heavier trailers. However, if it weighs too much, it may be unable to support the hitch properly & may fail.

Thus, it may also be possible to re-distribute the trailer’s weight. Whenever your trailer feels too weighty at the front, try shifting some of its weight to the back. By doing so, a more even distribution of weight can be achieved which can enhance stability. Depending on the model you purchase, you’ll be able to tow a certain amount of weight with your ProPride hitch.

Fixing the Problem:

Whenever you install a Propride hitch, make sure you maintain proper weight distribution. Alternatively, if you are unsure of what your trailer weighs, you can have it weighed on a scale. As a result, you will be able to determine whether your ProPride hitch is durable enough. In addition, if you didn’t weigh your trailer before purchasing a ProPride hitch, make sure its weight capacity is listed in its user manual.

Read Also: Grand Design Transcend vs Imagine RV – Which One to Prefer?

Problem 03: Vehicles Damaged Physically

Another problem people can encounter when using ProPride hitches is that the vehicle begins to suffer damage after using them. Finally, you might experience physical damage. If your trailer is involved in an accident or jackknifes into something, the connection might be damaged, which could compromise its integrity.

Then, when you have problems operating your ProPride trailer hitch, you need to check it for defects first. All parts should be checked for bends, cracks, and breaks. Whenever you discover damage, you should replace the entire hitch. Also, make sure your trailer is in good condition.

Despite the hitch looking OK, the trailer may have suffered damage due to the accident, potentially leading to further issues. Even still, the equipment is not responsible for this, but the tongue balance is. As previously mentioned, it is crucial to spread the weight of your vehicle & trailer evenly.

Finally, make sure you inspect the axles, frame, and wheels after a vehicle has been damaged. Even if there is no visible damage, there may be an issue with the connection between the hitch and the trailer. When the hitch isn’t connected properly, the trailer may drag or sway.

Fixing the Problem:

This problem needs to be fixed by consulting instructions from the manufacturer or consulting a professional. In the event of damage, you should replace the whole hitch. Additionally, make sure the equipment connections are securely tightened. The following tips should help you prevent vehicle damage. It is a good idea to occasionally remove the hitch. Finally, your vehicle can then be inspected for damage.

Read Also: Common Recurve R3 Hitch Problems – Causes & Solutions


How do you maintain a Propride hitch?

To maintain the Propride hitch, continually check the bolts and adjust tension as needed to ensure they are tight. Additionally, silicone-based lubricants are good for lubricating the hitch. A protective coating will prevent corrosion and allow the hitch to be easily connected and disconnected. Follow the manufacturer’s instructions when inspecting and maintaining your hitch.

How do you secure a ProPride hitch?

In order to secure the ProPride hitch, your truck’s receiver hitch should be fitted with a solid metal pin. On the end of the pin, attach the locking assembly. Using the key, secure the pin. Prevent corrosion by covering open keyholes with a rubber debris cap. Using Pivot Point Projection, or 3P, an application incorporated into the primary hitch head, pivot points no longer occur on the hitch ball when the trailer is towed.

Can ProPride hitch bend when working?

Definitely, ProPride hitches bend when they are in use. Make sure all parts are in good shape and they are not bent, cracked, or broken. When you notice any damage, the hitch should be replaced completely.

Final Words

A ProPride hitch is an excellent option when you want to connect your trailer safely and securely to your truck. In spite of that, they’re not perfect and have some Propride Hitch Problems, so you might encounter some issues. Propride hitches usually suffer from three problems: swaying, uneven weight distribution, & physical damage.

Fortunately, there are a couple of things accessible to you in order to avoid these issues from happening. However, maintain your hitch by inspecting it whenever needed, checking and adjusting its bolts as necessary, and relying upon manufacturer instructions when installing.

Read Also: Common Imagine XLS 21BHE RV Problems With Solutions

Similar Posts