Best Way To Replacing RV Tail Lights With LED (Full Guide)

Replacing your RV’s tail lights with LED bulbs is a great way to improve visibility while on the road. Not only are LEDs brighter than traditional incandescent light bulbs, but they also last longer, utilizing less energy.

Installing an LED light in place of the tail light of your RV is no rocket science. You just need to remove the old incandescent bulbs and put the LEDs in their place. After that, you need to secure them tightly so that they don’t fall off. There are even LEDs dedicated to particular RV models.

We will dive deeper into the process of replacing RV tail lights with LED bulbs in just a few simple steps later in this tutorial. So, stay tuned.

Some of the Best Alternatives for RV Tail Lights

Although the number of alternatives is not huge, there are some compatible options for replacing RV tail lights. Aside from LEDs (which are probably the best option), you can go for magnetic tail lights. These lights are fully wireless. You can also install a red replacement lens instead of any light. And if you are already thinking of LEDs, you can either go for the Miro-Flex LED combination or the Optronics LED combination. You can also install these lights on the driver’s or passenger’s side.

Why Do LED Lights Make the Best Alternative?

LED lights are more efficient than other types of lights. At the same time, they are brighter and consume less energy. To top it off, they are quite fashionable. Therefore, switching to an LED tail light for your RV is practically a necessary improvement.

When compared to other types of lights for quality, power usage, and lifespan, LEDs are unbeatable.

Step-By-Step Procedure to Replace RV Tail Lights with LED

LED lights are always cool. They are better than the usual RV tail lights, and they look fancy. In fact, some RVs have dedicated LED replacements for their tail lights, which is great. For instance, you will get LEDs dedicated to the Bargman 84 series tail lights.

Without further ado, let’s see how to RV tail lights with LEDs –

Take off the screws

First and foremost, take off the Phillips screws from the bezels of the tail lights on your RV. There might be 2 to 4 screws on each tail light, depending on your RV. Get a screwdriver and unscrew them.

Remove the old tail lights

Once the bezels or caps are taken off, remove the incandescent or halogen light bulbs. Use your hand to either pull them off or gently twist them counterclockwise until they come off the socket.

Insert the connector and place new LEDs

Now it is time to install the LED lights in place of the original lights. Hold the LED light with one hand while holding the bulb connector with another. Insert the bulb connector of the LED light into the socket and put the LED light in place.

Secure the LEDs by tightening the screws

At this point, secure the LED lights by attaching the Phillips screws back in place.

Test to see if the LEDs are properly working

To make sure the LED lights are working properly, try to light them up. If they start blinking or flashing, then you have successfully replaced your old RV tail lights with LEDs.

To gain a clearer understanding, you might want to watch the video below. The video will not only show the process of upgrading RV tail lights to LEDs but also give some valuable information.

Please Note –

While replacing traditional RV tail lights with LEDs, you may notice the blinker lights start to turn on and off rapidly. You can fix the issue by installing an electronic flasher.

FAQs.

Replacing the taillights on an RV with LED lights is a topic that people are constantly interested in learning about. We have gathered a few questions and tried to answer them below.

Do LED tail lights need resistors?

Load resistors are necessary when switching from the typical halogen or incandescent RV tail lights to LEDs. To stop the blinkers from excessively flashing, load resistors can be used in blinker circuits. Be sure to use registers with the right resistance and a recommended power.

Do LED trailer lights need unique wiring?

Regardless of the type, LED trailer lights use less electricity. This means that installing them correctly in place of your RV’s rear light does not require an additional light circuit or pricey electrical equipment. When you want to replace the light yourself, LEDs are an excellent alternative because they are simple to install in any RV.

Are LED tail lights better than regular RV tail lights?

Yes, LED lights are far better than traditional incandescent lights. LED lights are better for their longer life expectancy. Most of the time, regular light bulbs shake a lot when you are driving and deteriorate over the course of the year due to temperature variations. LEDs are not susceptible to the same situations.

Final Thoughts

Before using your new LED RV tail lights on the road, it is crucial to test them out after finishing the installation. To check that each one is operating correctly, turn on your running lights, brake lights, and reverse lights several times.

To make sure that other drivers can see your RV’s tail lights clearly at night, you might also want to try using an extra car from a friend or family member to test the signal from their car.

Once everything is working properly, you can enjoy the improved visibility, efficiency, and longevity of your new LED tail lights!

Zayan

Zayan is an accomplished author and a go-to expert for all things RV and camper-related. With a passion for adventure and a knack for problem-solving, he has spent years exploring the open road and fine-tuning his knowledge of recreational vehicles.

Zayan’s writing is a testament to his expertise, offering readers practical solutions to common RV dilemmas. Whether it’s troubleshooting mechanical issues, optimizing space, or planning the perfect road trip, Zayan’s insightful advice and engaging storytelling make him an invaluable resource for both seasoned travelers and newcomers to the world of RVing.