MCD Shade Won’t Stay Down | Here’s What You Can Do To Fix

Don’t settle for the silliest of issues regarding your recreational vehicle. When your MCD shade refuses to stay down, you have all the reasons to feel worried. We don’t realize the real role of the shade if it can’t stay down. You, too, might be! But what’s the issue?

There are many causes for the issue that MCD shade won’t stay down. Issues with the mounting brackets, dirty or corroded ratchet, and defective pawl mechanism are the primary causes that you must address to make the most out of your MCD shade on your RV.

We care about your feelings. You don’t want to face any more hustle with your RV shade. That’s why we disclose all you should know to fix the problem.

Why Does MCD Shade Won’t Stay Down?

First thing first, dealing with the issues regarding MCD shade is nothing surprising. Often, you might face some issues, and the shade that can’t stay down can be the most frequent. However, you can fix the issue by knowing what component is causing the problem.

1. Faulty Mounting Brackets

The faulty mounting brackets can be the culprit of not only the problem of the  MCD shade not staying down but other issues as well. No confusion about the importance of the mounting brackets on both sides of the tube in ensuring the proper functioning of the shade. 

According to a decent number of RV owners, the faulty mounting bracket can cause shade refuses to stay down. What exactly happens here is when the mounting brackets become defective, they can’t produce the tension that is needed to hold the shade down. 

In most cases, the mountain bracket on your MCD shade might be broken, and this causes the malfunction. Moreover, the mechanism responsible for moving up and down the shade is located in the mounting bracket.

The solution to this problem is pretty simple. If your MCD shade is still in the warranty period, call the manufacturer about the replacement. 

But, if the warranty period exceeds, you can buy shade mounting brackets from the market and replace them with faulty ones.

Read Also: Why Does The Rv Gray Tank Read Empty When Full? (Quick Fix)

2. Dirty Or Corroded Ratchet

With the passage of time, the ratchet of your MCD shade may also become dirty or corroded. And if this happens, the ratchet becomes unable to lock the shade.

The locking system is expected to support the shade, but in this case, when you pull down the shade, the shade doesn’t stay down as the locking system collapses.

So, there’s no other alternative than ensuring the ratchet on the MCD shade system on your FV functions properly. To be more precise, it must be accurate and works correctly when the shade stays down. 

Therefore, the best thing you can do here is to keep the ratchet clean and corroded. If it has become dirty already, before replacing it, make sure you clean the ratchet properly. First, inspect how much dust, debris, or corrosion there is in the ratchet. 

Next, you need to take a toothpick and gently remove the dust and debris from the ratchet of the Mcd shade on your recreational vehicle. 

It will also be decent to apply compressed air on the ratchet to clean it. In addition, apply some lubrication on the ratchet as well. Lubrication will help the ratchet to be protected from extreme dust or corrosion.

Read Also: Why Does My Rv Sleep Number Bed Make Knocking Noise?

3. Malfunctioning Pawl Mechanism

Similar to what happens with the ratchet, the same can happen in terms of the pawl. Moreover, the ratchet and pawl are intercorporate with one another. The pawl responds to the ratchet’s rotation and ensures the functionality of your RV shade remains smooth. 

In order to remove dirt or debris from the pawn mechanism, make sure you clean it properly. Using a vacuum hose on a low setting can be effective when it comes to cleaning it. Beyond that, ensure you take the entire shade to perform the task of cleaning comprehensively.

If the pawl mechanism becomes completely corroded,  it is better off replacing it. This requires removing the screws or clips holding the pawl mechanism.

Read Also: 5 Reasons Why Your Motorhome Blowing Particles Out Of Vent

How Much Does It Cost to Fix the Issue of Mcd Shade Won’t Stay Low?

The issue of MCD Shade can’t stay down can be irritating for experiencing it for the first time. However, you don’t need to take a bank loan in order to fix the issue. Moreover, cleaning components like ratchet and pawl mechanisms might do the job for you. 

Really? Yes. 

You may have a toothpick at your home. So, this can be used for cleaning the ratchet. However, if you need to replace it, it should cost you more than $8-$15, based on the model and quality. 

In terms of replacing the mounting bracket, you should spend approximately $15. The cost to replace (if needed) is almost similar to replacing a ratchet and mounting bracket. Too much?

Read Also: Why Thetford RV Toilet Won’t Stop Running & How to Fix It?

Frequently Asked Questions

We are curious to know what others say about our concerns. We can’t find any exception with the Mcd Shady refusing to stay down! Let’s discuss what people wonder about it.

Conclusion 

Good maintenance of your RV shades can help you get rid of the issue of MCD shade won’t stay down. However, you mustn’t delay any further to take the necessary measures when the issue arises instead of trying to force the shade to stay down.

Before replacing any component or the MCD shade system, remember to check if cleaning the components works. Properly installing the shade on your RV is also essential and you should focus on this.

Due to improper installation, the MCD shade can malfunction often. Hire a professional if you need prior shade installation and repair knowledge. A shade that can protect you from extreme sunlight is all you want. Good luck!

Read Also: How to Get 12V Power From a Trailer Plug? (Multiple Methods)